Quantcast
Channel: RXSOL - Sewage Chemicals Treatment-40
Viewing all 2359 articles
Browse latest View live

AQUA Tuff High Foam conc.

$
0
0

Aquatuff high foam liquid always be wise decision to clena ship cargo hold. As before loading of cargo surveyor first demand is -  Holds must be thoroughly cleaned and dry and trace free of previous cargo in frames.

Active Matter: 
45-50
Application: 

Most Help full cleaner for preparation of a cargo hold. In general cleaning of vessel's cargo holds Aquatuff High Foam plays very important  role during washing down with use of chemicals.  Aquatuff High foam classified as Marine Chemicals, Cleaning Chemicals; Cargo Hold Cleaning detergent.

Packing Size: 
210.00 Ltr.
Image: 
Thumb: 
Using Procedure: 

Refer this link for complete set of HOLD CLEANING KIT  ::: http://rxmarine.com/Ship-hold-cleaning-kit-set-supplier
 

The Importance High-Pressure Cleaning

The job of high pressure cleaning can be done easier & quicker by simply using AquaTuff in correct dosages. Using a high pressure cleaner alone, without any CLEANER, will not  achieve  optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard  surfaces, such  as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:

Step 1:  Spraying the  AquaTuff over the area to be cleaned.
Step 2:   Washing down the area using a high-pressure water jet.

After the AquTuff has been  sprayed on the surface and  before the wash down begins, the chemicals penetrates & thoroughly moistens dirt & other grime. During wash down, the AquaTuff thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results.In addition to being more effective, the use of AquaTuff substantially reduces the time required for the Cleaning operation, as well as preventing dirt from reforming on the surface. The use of AquaTuff in correct dosages is half the job done.

General Cleaning :- AquaTuff can be used for all types of cleaning &  degreasing & may  be applied by  Brush, Hand spray, high and low pressure washing machines etc. Time necessary for cleaning depends on the nature and  thickness of the deposits. 20-30 min. will suffice for   most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If  the cleaning  solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on degree of contamination AquaTuff should be mixed with warm water at a rate of 50-200 ml   per 10 litres. i.e. 1 cup of AquaTuff to a bucket of water. AquTuff solution can  be applied  simply by mops, brushes or rags, or by dipping the soiled articles into  the Aquatuff solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, AquaTuff is not recommended for washing machines. 

20-50 % with fresh water . Also acts as an acid-neutralizing agent for Boiler & Colling systems during cleaning & maintenance.
Heavy Soil deposition                    Use Undiluted from to 20-50% diluted with water. 
Medium soil deposition                 10-20%  diluted with water. 
Light Soil ( general degreasing )   5-10% diluted with water.

Note: 

For degreasing and removal of residues of minerals oil , coal stain and soot from surface.
superior & powerful alkaline cleaner. It is low toxic product with an exceptional solvency power on soil & oily  matter & having good foaming qualities. It is free from Hydrocarbon solvents , Biodegradable and minimizes the extreme hazards to personnel in handling materials .
Safety Phrases
S-2 Keep out of the reach of children.
S-26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S-36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S-45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).

 

Preparation

Preparing Cargo Holds for loading Grain depends on the previous cargo.

1. Cargo Holds must be thoroughly cleaned and dry and trace of previous cargo in frames,

beams, girders, and other structure.

2. There should not be any loose rust and or paint scale anywhere in the Cargo Holds,

Bulkheads, upper and lower hopper spaces, underneath of Hatch Covers and tank top.

3. There should not be traces of live & dead insect & weevils.

4. Bilge covers should be cleaned of any cargo residues and have enough drain holes. Bilge

cover needs to be grain tight but not watertight.

5. Bilge well should be cleaned of previous cargo dray and odour free.

6. Bilge suction should be operational at all the times. 

 

Removal of cargo residue:

Air Blow from top using high pressure air to reach all accessible corners. Cargo to be swept,

scrapped & collected in a drum. Attention to be given

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

 

 

Then Cleaning and sweeping coal cargo from the hold

 as maximum possible by HELPER / Crew member

 

Loose Rust & Paint Scale:

A sharp hand scraper shall be used to take off the peeling rust & paint scale

Special attention to following areas:

• Australian ladder and its platforms, hand rails and stanchions

• Australian ladder and its platforms and stanchions

• Beams and girders under cross decks

• Frames, beams, girders, and other structure

• Large pipes holding brackets behind the pipes

• Hatch coamings and under hatch covers

• Booby hatches & cover

 

Tank top loose rust

Tank top should be free of loose rust and cargo residue

Any rust which can be scraped by hand scrapers should be removed.

The tank top should be rinsed with fresh water

 

Cleanliness of cargo hold bilges

Hold bilges must be cleaned thoroughly to remove all residue, rust particles and cargo

stains etc.

The filter (Rose Box) must be cleaned thoroughly

The bilge well sections shall be washed with continuous running of sea water to remove

all odour and later rinsed with fresh water

Short Description: 
Very effective alkaline ship hold cleaner also can be use as multi purpose ship hold cleaning and general digressing agent. its heavy molecular surfactants rapidly reacts with water and produce effective cleaning solution .May be applied by brush, hand spray and by high and low pressure washi
Information: 

Aquatuff High foam is specialized ship hold bulk carrier cleaning chemicals. Our group team also providing direct online support for cleaning tips during Hold cleaning of ships. Aquatuff High Foam MSDS and Using procedure also available online to our customer. We are one of largest ship hold cleaning chemicals supplier in India - Middle East which also covers Lime Remover, Coal Remover, Slip coat, Hold Wash and many more...Pl. click here ( http://www.rxmarine.com/HoldSolution-22 ) to know our various range of Hold Cleaning products...

read more


Descaling Liquid 210 Ltrs

$
0
0

Fast and effective scale remover which removes scale and rust from condensers, evaporators, heat exchangers,Rediator,  boilers etc. RXSOL-16-1008-210 , Descaling Liquid  is a liquid mixture of descaling accelerators, corrosion-inhibitors and wetting agents.

Uniqueness of 1008 :: --

Alias: 

DESICCANTS CHEMICAL, DESCALER MTA, DESCALE IT

Application: 

Features, Benefits and Applications

  • Scale dissolver product contains inhibitors against attack on ferrous metals.
  • Unlimited shelf life.
  • Easy to rinse off.
  • Fast and effective scale remover.
  • Removes scale and rust from condensers, evaporators, heat exchangers,Rediator etc.

Removes water scale from boilers.
RXSOL brand descaler is one of POPULAR brand in INDIA and Middle East. We are One of Largest Descaler manufacturer, Exporter and supplier.
 

Packing Size: 
210.00 Ltr.
Image: 
Thumb: 
Using Procedure: 

The most effective RXSOL-16-1008-210, Descaling Liquid is accomplished by circulation for large systems or components. In the case of small components, the soak method in an immersion bath can be used.

If the equipment to be cleaned is contaminated by oil, grease, sludge or carbonised oil, then pre-cleaning with RXSOL-20-2002-025 ( www.rxmarine.com/seacleaner-25-ltr )  is necessary.

RXSOL-16-1008-210 should alway be used in plastic bucket. RXSOL-16-1008-210 should always be added in , never add water in RXSOL-16-1008-210.

RXSOL-16-1008-210 dilute with fresh water as 5-30%,  solution depending on scale.

After using RXSOL-16-1008-210 rinse all metal surfaces at least one time with a 0.5% solution of RXSOL-20-2005-025 ( www.rxmarine.com/alkaleen-liquid-heavy-duty-25-ltr )  in fresh water. This solution should be circulated for 2-4 hours or until pH value comes 6-7. This will neutralize any remaining acid and passivate steel surfaces.

Note: 

Pooperties:-

Appearance:

Pale yellow or Brown Liquid

 

 

Density, in g/cm3 at 15°C:

1.2

 

 

Flash Point, (PMCC) in °C:

N/A

 

 

pH, in conc:

< 1.5

 

 

Compatibility:

 

 

 

Metal:

Contains corrosion inhibitors.

 

 

Rubber:

No known effect.

 

 

Synthetic rubber:

May swell.

 

 

PACKAGING:

Product no:

Size (in litres):

Container:

 

RXSOL-16-1008-210

25/50

Plastic

 

Why Use RXSOL Descaler?

  • It is a safe , economical concentrated  chemical to be used on the waterside of heat transfer equipment.
  • You do not have to heat RXSOL 1008 .
    RXSOL 1008  is safer for the employees to use than other acid products.
  • Your equipment will be cleaned in only hours without disassembling any part of the equipment. Equipment can also be cleaned without any down time (cleaning on the run).

  •  Cleans down to the original surface without pitting.
  •  RXSOL 1008 is safe on copper, copper-nickel, bronze, brass, iron, stainless steel and rubber.
  •  RXSOL 1008  will extend the usable life of your equipment, especially when used as a part of a regularly scheduled preventative maintenance program.
  •  Removing the scale build up allows your equipment to operate more efficiently with less down time.
Short Description: 
Fast and effective scale remover which removes scale and rust from condensers, evaporators, heat exchangers,Rediator, boilers etc. RXSOL-16-1008-210 , Descaling Liquid is a liquid acid containing descaling accelerators, corrosion-inhibitors and wetting agents.

read more

Air Cooler Cleaner Sea Water SIDE 25 Ltr

$
0
0

Dirt in tubes of seawater side

White scales attached on the seawater side of air coolers of many vessels. We found that in most cases, the main component of the scales is calcium carbonate and there is also a small amount of calcium sulfate. Therefore in most cases, if you dissolve the calcium carbonate the scales will be removed.

Alias: 

De-scalex (Liquid), YUNISOL X

Application: 

RXSOL-54-1048-020  is mixed with fresh water 3 to 20 percent depending on deposition of scaling.

If the equipment to be cleaned is contaminated by oil, grease, sludge or carbonized oil, then first of all clean the system with degreaser  RXSOL-10-1005. RXSOL-54-1048-020 should be mixed with fresh water to form a solution of 10-30%, depending on the extent of scaling. After using RXSOL-54-1048-020 ,  

PRECAUTION :::it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of  RXSO-20-2005  in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces.

Procedure-of-use: The most effective descaling is accomplished by circulation.In the case of small components,the soak method in an immersion bath can be used. If the equipment to be cleaned is contaminated by oil, grease or sludge, then pre-cleaning with DEGREASER ( RXSOL OB 1005 ) is necessary. Depending on the extent of scaling, use a solution of 2.5-10% RXSOL-54-1008-025 . The solution will have a red colour which changes to orange when 85% of the acid has been neutralized , & to colourless  when the solution is totally neutralized. Whenever possible, the solution should be heated to 60°C.Neutralised  solutions can be re-activated by adding more RXSOL-54-1008-025  until the red colour reappears. 

Fields: Descaling of  Boilers, Descaling  of Diesel Engine Cooling Systems, Condenser, Pipeline collection system, Evaporators, Calorifiers, Heat Exchangers,The strength of the acid can be enhanced by adding 1part sodium chloride (common salt) to 20 parts of Descalex.If salt is not available, an acceptable alternative is to dissolve RXSOL-54-1008-025  in sea water. After use of RXSOL-54-1008-025  a  0.5% solution of Alkalinity Control in fresh  water should be used for neutralization.

Packing Size: 
25.00 Ltr.
Image: 
Thumb: 
Using Procedure: 

After using  RXSOL-54-1048-020, sense all metal surfaces with 0.5 percent of  RXSOL-10-1005, at least 2-4 hour , up to neutral of PH value.

• Fast and effective scale remover.
• Soft on ferrous metals.
• Removes water scale & rust from boilers/diesel engine & other cooling system
• As well as from condensers, evaporators, & heat exchangers etc
 

Why Use RXSOL Descaler?

  • It is a safe , economical concentrated  chemical to be used on the waterside of heat transfer equipment.
  • You do not have to heat RXSOL-54-1048-020 .
    RXSOL-54-1048-020  is safer for the employees to use than other acid products.
  • Your equipment will be cleaned in only hours without disassembling any part of the equipment. Equipment can also be cleaned without any down time (cleaning on the run).

  •  Cleans down to the original surface without pitting.
  •  RXSOL-54-1048-020 is safe on copper, copper-nickel, bronze, brass, iron, stainless steel and rubber.
  •  RXSOL-54-1048-020  will extend the usable life of your equipment, especially when used as a part of a regularly scheduled preventative maintenance program.
  •  Removing the scale build up allows your equipment to operate more efficiently with less down time.

     

Note: 

 

Automotive - Closed Circuit Cooling, Dynamometers, Extruders, Molders, Radiators, Welders

Bottling - CO2 Generators, Heaters, Exchangers, Rinse Tanks, Sterilizers, Washers

. HOUSE HOLD - Dissolves hard and old lime scale deposits from your appliances. It extends the life of the appliance and saves running cost. It can be used in appliances such as Washing Machines, Dish Washers, Geysers, Steam Iron, Coffee Makers, Bath Tubs, Bathroom Fixtures etc.

Buildings - Chillers, Cooling Towers, Pipework

Chemicals - Dryers, Extruders, Kettles, Mixers, Reactors, Scrubbers, Vacuum Pumps

Food - Condensers, Ice Machines, Kathabars, Refrigeration Equipment, Steam Tables

Manufacturing - Chillers, Compressors, Furnaces, Quenchers, Vacuum Pumps

Metals - Bearings, Castings, Fans, Hearth & Vacuum Furnaces, Shelters, Sprays

Mining - Bearings, Conveyors, Filters, Presses, Process Lines, Radiators

Paper- Calendar Mill Rolls, Caustic Lines, Scrubbers, Compressors, Liquor Tanks, Pulverizers, Vacuum Pumps

Pharmaceutical- Exchangers, Loop Systems, Kathabars, Pumps, Reactors, Stills, Sterilizers

Refinery - Compressors, Converters, Crackers, Exchangers, Piping, Pumps

Rubber/Plastics - Banbury Mixers, Calendar & Mill Rolls, Extruders, Injection Molders, Molds, Temperature Control Units, Throat Coolers, Towers, Tubers

Steel - Bearings, ConCast Units, Generators, Hearths, Spangle Units, Furnaces

Textile - Air Washers,Compressors, Condensers, Exchangers, Extruders,Towers

 

Boilers

Condensers

Filters

Heat Exchangers

Kettles & Tanks

Pipelines

Pots

Reactors

Steam Jackets

Bath Rooms and Showers

Metal Processing and much more!

 

Applications

  Automotive

  Bottling

  Chemicals

  Food

  - Closed Circuit Cooling

  - Dynamometers

  - Extruders

  - Molders

  - Radiators

  - Welders

  - CO2 Generators

  - Heaters

  - Exchangers

  - Rinse Tanks

  - Sterilizers and Washers

  - Dryers

  - Extruders

  - Kettles

  - Mixers

  - Reactors

  - Scrubbers

  - Vacuum Pumps

  - Condensers

  - Ice Machines

  - Kathabars

  - Refrigeration Equipment

  - Steam Tables

  Manufacturing

  Metals

  Mining

  Paper

  - Chillers

  - Compressors

  - Furnaces

  - Quenchers

  - Vacuum Pumps

  - Bearings

  - Conveyors

  - Fans

  - Hearth & Vacuum Furnaces

  - Shelters

  - Sprays

  - Bearings

  - Conveyors

  - Filters

  - Presses

  - Process Lines

  - Radiators

  - Calendar Rolls

  - Mill Rolls

  - Caustic Lines

  - Scrubbers

  - Compressors

  - Liquor Tanks

  - Pulverizers

  - Vacuum Pumps

  Pharmaceutical

  Refinery

  Rubber & Plastics

  Steel

  - Exchangers

  - Loop Systems

  - Kathabars

  - Pumps

  - Reactors

  - Stills

  - Sterilizers

  - Compressors

  - Converters

  - Crackers

  - Exchangers

  - Piping

  - Pumps

  - Banbury Mixers

  - Calendar & Mill Rolls

  - Extruders

  - Injection Molders

  - Molds

  - Temperature Control - Units

  - Throat Coolers

  - Towers and Tubers

  Bearings

  ConCast Units

  Generators

  Hearths

  Spangle Units

  Furnaces

  Textile

  Utilities

  Other Applications

   

  - Air Washers

  - Compressors

  - Condensers

  - Exchangers

  - Extruders and Towers

  - Boilers

  - Turbines

  - Transformers

  - Cooling Towers

  - Air Compressors

  - Hydrogen Coolers

  - Lube Oil Heat Exchangers

  - Ball Mills

  - Demisters

  - Evaporators

  - Locomotives

  - Absorption Units

  - Diesel Generators

  - Induction Furnaces

 
 

Short Description: 
Safe Acid Descalex Liquid 20 Ltr

read more

Safe Acid Descalex Liquid 25 Ltr

$
0
0

Alias: 

"SEA SHEILD" SAFE ACID 79116

Application: 

RXSOL-54-1048-025  is mixed with fresh water 3 to 20 percent depending on deposition of scaling.

If the equipment to be cleaned is contaminated by oil, grease, sludge or carbonized oil, then first of all clean the system with degreaser  RXSOL-10-1005. RXSOL-54-1048-025 should be mixed with fresh water to form a solution of 10-30%, depending on the extent of scaling. After using RXSOL-54-1048-0250 ,  

PRECAUTION :::it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of  RXSO-20-2005  in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces.

Procedure-of-use: The most effective descaling is accomplished by circulation.In the case of small components,the soak method in an immersion bath can be used. If the equipment to be cleaned is contaminated by oil, grease or sludge, then pre-cleaning with DEGREASER ( RXSOL OB 1005 ) is necessary. Depending on the extent of scaling, use a solution of 2.5-10% RXSOL-54-1008-025 . The solution will have a red colour which changes to orange when 85% of the acid has been neutralized , & to colourless  when the solution is totally neutralized. Whenever possible, the solution should be heated to 60°C.Neutralised  solutions can be re-activated by adding more RXSOL-54-1008-025  until the red colour reappears. This should not be done more than twice. RXSOL-54-1008-025  should not be used on Aluminium , Zinc, Tin or Galvanized surfaces.

Fields: Descaling of  Boilers, Descaling  of Diesel Engine Cooling Systems, Condenser, Pipeline collection system, Evaporators, Calorifiers, Heat Exchangers,The strength of the acid can be enhanced by adding 1part sodium chloride (common salt) to 20 parts of Descalex.If salt is not available, an acceptable alternative is to dissolve RXSOL-54-1008-025  in sea water. After use of RXSOL-54-1008-025  a  0.5% solution of Alkalinity Control in fresh  water should be used for neutralization.

Packing Size: 
25.00 Ltr.
Image: 
Thumb: 
Using Procedure: 

After using  RXSOL-54-1048-025, sense all metal surfaces with 0.5 percent of  RXSOL-10-1005, at least 2-4 hour , up to neutral of PH value.

• Fast and effective scale remover.
• Soft on ferrous metals.
• Removes water scale & rust from boilers/diesel engine & other cooling system
• As well as from condensers, evaporators, & heat exchangers etc
 

Why Use RXSOL Descaler?

  • It is a safe , economical concentrated  chemical to be used on the waterside of heat transfer equipment.
  • You do not have to heat RXSOL-54-1048-025 .
    RXSOL-54-1048-025  is safer for the employees to use than other acid products.
  • Your equipment will be cleaned in only hours without disassembling any part of the equipment. Equipment can also be cleaned without any down time (cleaning on the run).

  •  Cleans down to the original surface without pitting.
  •  RXSOL-54-1048-025 is safe on copper, copper-nickel, bronze, brass, iron, stainless steel and rubber.
  •  RXSOL-54-1048-025  will extend the usable life of your equipment, especially when used as a part of a regularly scheduled preventative maintenance program.
  •  Removing the scale build up allows your equipment to operate more efficiently with less down time.
     
Note: 

 

Automotive - Closed Circuit Cooling, Dynamometers, Extruders, Molders, Radiators, Welders

Bottling - CO2 Generators, Heaters, Exchangers, Rinse Tanks, Sterilizers, Washers

. HOUSE HOLD - Dissolves hard and old lime scale deposits from your appliances. It extends the life of the appliance and saves running cost. It can be used in appliances such as Washing Machines, Dish Washers, Geysers, Steam Iron, Coffee Makers, Bath Tubs, Bathroom Fixtures etc.

Buildings - Chillers, Cooling Towers, Pipework

Chemicals - Dryers, Extruders, Kettles, Mixers, Reactors, Scrubbers, Vacuum Pumps

Food - Condensers, Ice Machines, Kathabars, Refrigeration Equipment, Steam Tables

Manufacturing - Chillers, Compressors, Furnaces, Quenchers, Vacuum Pumps

Metals - Bearings, Castings, Fans, Hearth & Vacuum Furnaces, Shelters, Sprays

Mining - Bearings, Conveyors, Filters, Presses, Process Lines, Radiators

Paper- Calendar Mill Rolls, Caustic Lines, Scrubbers, Compressors, Liquor Tanks, Pulverizers, Vacuum Pumps

Pharmaceutical- Exchangers, Loop Systems, Kathabars, Pumps, Reactors, Stills, Sterilizers

Refinery - Compressors, Converters, Crackers, Exchangers, Piping, Pumps

Rubber/Plastics - Banbury Mixers, Calendar & Mill Rolls, Extruders, Injection Molders, Molds, Temperature Control Units, Throat Coolers, Towers, Tubers

Steel - Bearings, ConCast Units, Generators, Hearths, Spangle Units, Furnaces

Textile - Air Washers,Compressors, Condensers, Exchangers, Extruders,Towers

 

Boilers

Condensers

Filters

Heat Exchangers

Kettles & Tanks

Pipelines

Pots

Reactors

Steam Jackets

Bath Rooms and Showers

Metal Processing and much more!

 

Applications

  Automotive

  Bottling

  Chemicals

  Food

  - Closed Circuit Cooling

  - Dynamometers

  - Extruders

  - Molders

  - Radiators

  - Welders

  - CO2 Generators

  - Heaters

  - Exchangers

  - Rinse Tanks

  - Sterilizers and Washers

  - Dryers

  - Extruders

  - Kettles

  - Mixers

  - Reactors

  - Scrubbers

  - Vacuum Pumps

  - Condensers

  - Ice Machines

  - Kathabars

  - Refrigeration Equipment

  - Steam Tables

  Manufacturing

  Metals

  Mining

  Paper

  - Chillers

  - Compressors

  - Furnaces

  - Quenchers

  - Vacuum Pumps

  - Bearings

  - Conveyors

  - Fans

  - Hearth & Vacuum Furnaces

  - Shelters

  - Sprays

  - Bearings

  - Conveyors

  - Filters

  - Presses

  - Process Lines

  - Radiators

  - Calendar Rolls

  - Mill Rolls

  - Caustic Lines

  - Scrubbers

  - Compressors

  - Liquor Tanks

  - Pulverizers

  - Vacuum Pumps

  Pharmaceutical

  Refinery

  Rubber & Plastics

  Steel

  - Exchangers

  - Loop Systems

  - Kathabars

  - Pumps

  - Reactors

  - Stills

  - Sterilizers

  - Compressors

  - Converters

  - Crackers

  - Exchangers

  - Piping

  - Pumps

  - Banbury Mixers

  - Calendar & Mill Rolls

  - Extruders

  - Injection Molders

  - Molds

  - Temperature Control - Units

  - Throat Coolers

  - Towers and Tubers

  Bearings

  ConCast Units

  Generators

  Hearths

  Spangle Units

  Furnaces

  Textile

  Utilities

  Other Applications

   

  - Air Washers

  - Compressors

  - Condensers

  - Exchangers

  - Extruders and Towers

  - Boilers

  - Turbines

  - Transformers

  - Cooling Towers

  - Air Compressors

  - Hydrogen Coolers

  - Lube Oil Heat Exchangers

  - Ball Mills

  - Demisters

  - Evaporators

  - Locomotives

  - Absorption Units

  - Diesel Generators

  - Induction Furnaces

Short Description: 
This descaler specifically formulated and developed to rapidly clean mineral scale from passages in water-cooled or heated equipment. It improves Plant Efficiency, Lowers Cost, Conserves Energy, Decreases Down-Time.

read more

Bilge Water Flocculant

$
0
0

Bilge Water Flocculant is a very effective liquid treatment based on  Poly chloride to separate oil residues from bilge water. It is iron-free, and is completely safe to the environment.

Application: 

International environmental regulations set strict rules as to the oil content in effluent water from ships. To meet these regulations, a combination of mechanical and chemical cleaning is necessary. Bilge Water Flocculant is used in combination with multistage bilge water cleaning systems that include mechanical separation of free oil, emulsion breaking, flocculation and filtration. After dosing, Bilge Water Flocculant breaks the oil-in-water emulsion created by contaminants in lubricating and fuel oils, emulsifying cleaning agents etc. It then destabilizes the remaining small oil droplets and agglomerates them into larger particles (flocs) that are easily collected by filtering.

Packing Size: 
25.00 Ltr.
Image: 
Thumb: 
Using Procedure: 

Dosing method

Typical dose rate: 100 - 500ppm (0.1 - 0.5 litre/m3 of water) In a multistage bilge water cleaning system, Bilge Water Flocculant is fed undiluted through a dosage pump connected to the pressure side of the oil descaler. The floc tank is fed according to the flow of the bilge water pumped into it. The feed is adjusted in connection with the installation and normally needs no alteration. If required, dosing can also be controlled by measuring the level in the container.
 

Note: 

Features

  • Cost-effective bilge water treatment based on specially selected Poly Aluminium Chloride
  • Iron-free. Completely safe to the environment
  • Acts by both breaking the oil-in-water emulsion and by building flocs
  • Helps to meet environmental regulations on oil content. Discharged water contains normally less than 3 ppm oil
  • Remaining oil sludge can be burned onboard or pumped ashore-contains very little water
  • Low dosage, economical use
  • Effective over an extended pH-range. Eliminates the use of pH-stabilising chemicals
  • Approved by manufacturers of bilge water cleaning systems
Short Description: 
Separate oil residues from bilge water. It is iron-free, and is completely safe to the environment.

Truck Wash Brightener

$
0
0

Truck Wash Brightener is a clear liquid which contains inorganic acids and surface active agents that are specifically blended into a stable, highly active concentrate for the cleaning and brightening tractors and tractor trailers. Some of its uses include cleaning bright surfaces, removal of light rust, corrosion protection, conditioner of painted surfaces and conditioning aluminum surfaces.

Active Matter: 
63-72
Packing Size: 
25.00 Ltr.
Image: 
Thumb: 
Using Procedure: 

Dilute with water before using. The level of dilution depends on the nature and the temperature of the surface being treated.

Can be applied by brushing or high pressure spray wash.

Always Work from bottom to top both on application and rinse. Allow the solution to work for 10 minutes or less prior to rinsing.

Recommended concentrations are 10:1 dilutions for brush application and 20:1 for pressure washing application.

Do not permit solution to dry on surface, rinse completely and preferably by covering area with a high pressure rinse.

When used as directed, it is safe on aluminum, copper, Plexiglas, stainless steel, brass, iron, painted surfaces, steel, bronze, lead and rubber. Also very effective in removing brake dust and black carbon stains. It is not safe on galvanized surfaces, zinc magnesium, chrome and tin.

Short Description: 
Truck Wash Brightener is a clear liquid which contains inorganic acids and surface active agents that are specifically blended into a stable, highly active concentrate for the cleaning and brightening tractors and tractor trailers.

HEDP 60%

$
0
0

Alias: 

1-Hydroxy Ethylidene-1,1-Diphosphonic Acid [HEDP 60%],Hydroxyethylidenedi(phosphonic acid); Dequest 2010; Etidronic acid; HEDP, AQUACID 105EX

Active Matter: 
58-62
Application: 

RXSOL-81-8160-250 chemically having wide range of applications including scale prevention and corrosion inhibition in water treatment. 

Hydroxy Ethylidene -1,1-Diphosphonic acid is organophosphonate with multifunctional properties like sequestration, deflocculation, threshold inhibition and hydrolytic stability, as a single active ingredient. Because of the combination of these properties Hydroxy Ethylidene -1,1-Diphosphonic acid has a wide range of applications. One of the most important applications is in scale prevention and corrosion inhibition in water treatment. 

Packing Size: 
275.00 Kg.(Liq)
Image: 
Thumb: 
Using Procedure: 

HEDP is used as chelating agent. The dosage of 1-10mg/L is preferred as scale inhibitor, 10-50mg/L as corrosion inhibitor, and 1000-2000mg/L as detergent. Usually, HEDP is used together with polycarboxylic acid. It is used as a strong chelating agent for metal ions like Ca, Mg & Fe in water treatment, textile applications. Its efficient inhibition for CaCO3 & CaSO4 alone or in combination with low molecular weight polymers. Very effective in protecting metal corrosion. HEDP also having very strong chlorine stability. 

Note: 

Storage for ten months in room shady and dry place. Safety Protection: Acidity, Avoid contact with eye and skin, once contacted, flush with water. 

Short Description: 
Chelating agent, Scale and Corrosion Inhibitor. Scale prevention and corrosion inhibition in water treatment.

read more

Acid corrosion Inhibitor RXSOL 213

$
0
0

Inhibitor for ACID

Acid corrosion Inhibitor RXSOL 213  is an organic, liquid, cationic corrosion inhibitor especially designed to inhibit the attack of hydrochloric acid oiron and steel during industrial cleaning operations. It also inhibits acid attack on copper and brass. It does not contain arsenic, chlorinated hydrocarbons, or lead compounds.

Alias: 

Rodine 213, Corrosion Inhibitor for Hydrochloric Acid Cleaning, Lith Solvent 803

Active Matter: 
93-98
Application: 

The addition of Acid corrosion Inhibitor RXSOL 213, inhibitors to hydrochloric acid solution provides maximum protection for equipment during:
A. The removal of lime deposits or water scale from power plant boilers and piping systems and from evaporating equipment.

B. The removal of scale and deposits from equipment in refineries, utility companies,paper mills, chemical plants and other industries.

Acid corrosion Inhibitor RXSOL 213 inhibitors meet the requirements of Military Specification Nos.MIL-I-17433 and MIL-C-17434.

Packing Size: 
5.00 Ltr.
Image: 
Thumb: 
Using Procedure: 

For each For each 1000ltrs of pickling bath RODINE 31A must be added at the rate of 1 to 5ltrs (1.1 - 5.7kgs)* hydrochloric acid solution, not less than the following amount of Acid corrosion Inhibitor RXSOL 213  inhibitor should be used:

The dosage varies with the bath temperature as follows:

Up to 65 C - 1ltr (1.1kg)

65°C - 80°C - 3ltrs (3.4kg)

80°C - 90°C - 4ltrs (4.6kg)

90 - 100°C - 5ltrs (5.7kg)

The exceptional strength and heat stability of Acid corrosion Inhibitor RXSOL 213 give the user a considerable safety factor in relation to temperature, acid strength, and time. Acid corrosion Inhibitor RXSOL 213 may be added to either the diluted or concentrated hydrochloric acid. In either case, Acid corrosion Inhibitor RXSOL 213 should be thoroughly mixed with the acid by stirring or agitation.

The hydrochloric acid solution inhibited with Acid corrosion Inhibitor RXSOL 213 is best circulated through the equipment to be cleaned. When circulation cannot be accomplished, the equipment should be filled with the inhibited acid and allowed to react for sufficient time to remove the objectionable deposits. To estimate the proper acid concentration and cleaning time, samples of the deposits to be removed can be tested in the laboratory prior to cleaning. If heating of the equipment to be cleaned or acid solution is desired to speed the cleaning action, it should be done prior to the start of the cleaning operation
 

Description:

For replenishment of bath with concentrated pickling acid, RXSOL 213 should be dosed at the rate of 0.6 to 2.3kgs (0.5 to 2.0ltrs) per 100kgs of concentrated pickling acid.

RXSOL 213 is completely effective up to the following maximum temperatures:

In Hydrochloric acid - max.60°C

In Sulfuric, sulfamic and phosphoric acid- max.80°C In other acids - max.100°C..

 

Note: 

Storage and Disposal

Acid corrosion Inhibitor RXSOL 213 and will not freeze at temperature as low as -20° Fahrenheit. Below 0° Fahrenheit,Acid corrosion Inhibitor RXSOL 213 become very viscous and may be difficult to pump. It is recommended that Acid corrosion Inhibitor RXSOL 213  be stored in a dry area where the temperature will not go lower than 0° Fahrenheit.

Applicable regulations concerning disposal and discharge of chemicals should be consulted and followed-

Disposal information for Acid corrosion Inhibitor RXSOL 213 is given on the Material Safety Data Sheet for each product.The industrial cleaning bath is acidic and contains hydrochloric acid and organic Acid corrosion Inhibitor RXSOL 213  components. Waste treatment , neutralization is required. The industrial cleaning bath and sludge can contain ingredients other than those in the chemical as supplied and analysis of the solution and/or sludge is required before waste treatment and disposal.

Safety and Handling :

Before handling the chemical products used in this process, the first aid and handling recommendations on the Material Safety Data Sheet for should be read, understood and followed. The industrial cleaning bath is strongly acid and can burn skin and eyes. Refer to the Material Safety Data Sheet for hydrochloric acid for recommendations for protective action.

Short Description: 
The addition of Acid corrosion Inhibitor RXSOL 213, inhibitors to hydrochloric acid solution provides maximum protection for equipment during,The removal of lime deposits or water scale from power plant boilers and piping systems and from evaporating equi

Sodium Sulphite (sulfite) with Catalyst Liq

$
0
0

Sodium sulfite solution with the chemical formula Na2SO3

Application: 

Dechlorination in municipal wastewater, pulp & paper, power, and textile water treatment plants

Boiler water treatment

Oxygen scavenger

Preservative

Pharmaceuticals

Flue gas desulfurization

Chemical manufacturing in the sulfonation process

Preservative in photo developer solutions

Packing Size: 
25.00 Kg.(Liq)
Image: 
Thumb: 
Short Description: 
Liquid Solution with blend of CATALYST sole means of oxygen removal from feed Water

read more

FERROUS SULPHATE

$
0
0

FERROUS SULPHATE manufacturer, supplier and exporter from INDIA

Ferrous sulfate was used in the manufacture of inks
Ferrous sulfate is added to the cooling water flowing

Application: 

As coagulant for water treatment

Dyeing

Coagulation for pigments or industrial wastes

Potable drinking water

Municipal and industrial wastewater treatment

Sludge conditioning.

Removal of natural organic matter in water

Ferric sulphate works to prevent odor by eliminating hydrogen sulfide. 

Packing Size: 
25.00 Kg.(PWD)
Image: 
Thumb: 
Using Procedure: 

CAS CODE : 10028-22-5

MOLECULAR WEIGHT : 399.88 

Solubility : Slightly soluble in cold water , & Soluble in hot water
 

Assay

65 - 70 %     

Assay as Fe

17.5 - 19 %

Appearance : Off white / Yellowish  powder

Note: 

Packing:
25 Kg HDPE Bags with inner liner 

Shipment Class

Non Hazardous

Short Description: 
FERROUS SULPHATE

TRUCK Mounted Cleaner Descaler

$
0
0

Cleaning of Scale and mineral deposits from truckmount becomes very easy by using RXSOL-41-4148-010 ( TRUCK Mounted Cleaner Descaler ). Routine cleaning and removal of hard water deposits from truckmount heat exchangers, fittings, valves, screens, metering systems, sensors, and water lines etc always be wise deceision. RXSOL-41-4148-010 premium powder formula of specialty ingredients is a  for easier and safer cleaning. 

Alias: 

Truck Mount Descaler

Application: 

Good Advice Apply RXSOL-41-4148-010 on WET surface only, Do not let dry the product on surfaces without rinsing.  Every machine is different. Basically, pour liquified descaler ( powder with water premixed ) into the water box. If your truckmount has a bypass orifice remove it and replace the plug or cap on the manifold.

Packing Size: 
1.00 Kg.(PWD)
Image: 
Thumb: 
Using Procedure: 

Inhibitor protects truck mount components.

First of all mix 1 Kg powder with 4 Ltr water to get powder dissolve completely in to the BUCKET. Then disconnect truck mount water inlet and solution outlet hoses. Drain water completely from water box, Then add 4 Ltr powder mixed water into water box to dissolve. Then start engine to run solution through truck mount  atleast for 15 minutes to dissolve scale from surface. Finally connect water inlet hose and solution hose, flush with water for 5 minutes. Add 250ml of Alkali Cleaner RXSOL ORG - 6 to water box and run for 2 to 5 minutes to neutralise residual of scale ion. Then circulate system with clear water to remove all loose particle as well as cleaner present inside the system. 
 
Note For heavy scale build-up Truck Mount Descaler may be diluted with mix 1.5 Kg powder with 4 Ltr water and the solution should be circulated for a longer period.

Note: 

Dilutions rates recommended : 

Light Duty Cleaning      : 500 Gram  : 4 Ltrs WATER
Normal Cleaning           :  1 Kg  : 4 Ltrs WATER  15 minutes  or  Time duration can be increased up to 45 minutes for Heavy deposit cleaning.
Heavy Duty Cleaning    : 1 Kg  : 4 Ltrs WATER   15 minutes

Short Description: 
For removal of hard water deposits from truckmount heat exchangers, fittings, valves, screens, metering systems, sensors, and water lines etc
Information: 

Truck Mount descaler manufacturer, Supplier and exporter in various packing and customized packing. Truck mount descaler are avialable with us in Powder as well as in Liquid stage. Powder form of Descaler are easy to carry and storage while liquid stage of Truck mount descaler is easy to use and application. Liquid decaler cane be easily apply in to the system. Premix with water doesn't required as POWDER Truck mount descaler can't use directly for application, its mixing with water must  required.

RXSOL Altreat 400

$
0
0

Cost-effective recovery of fresh water from seawater is critical to a wide range of industries such as the power, chemical, marine, oil and gas industries. During the distillation process, the formation of scale on heat transfer surfaces can significantly reduce heat transfer efficiency and increase operation and maintenance costs. Scale formation depends on temperature, concentration and pH, but generally takes the form of:

Alias: 

Alpacon Altreat 400

Application: 
RXSOL Altreat 400 scale inhibitor is a polycarboxylic acid that controls inorganic scale formation. Small amounts of this copolymer, based on maleic acid, effectively handles large quantities of dissolved salts, thus preventing precipitation,settling and baking onto heat transfer surfaces. RXSOL Altreat 400 also impairs crystal growth, modifying the crystal structure to create a soft sludge byproduct that does not adhere to heat transfer surfaces.RXSOL Altreat 400 readily dissolves in any type of water. The typical dosage to feedwater ranges from a minimum of two parts per million (ppm) to a maximum of 10 ppm, depending on the quality of the seawater. This versatile antiscalant effectively performs at the range of temperatures encountered during mechanical vapour compression and during single and multi-effect distillation processes.Test results demonstrate that RXSOL Altreat 400 is more effective than other scale inhibitors under variable conditions,including water type, temperature and run time.
Packing Size: 
25.00 Ltr.
Image: 
Thumb: 
Using Procedure: 

Instructions for use

  • Normal dosing rate 2–10 ppm (max. 10 ppm), depending
  • on the properties of the water to be treated. Ensure adequate mixing at chemical tank before dosing into the system.
  • Recommended operating temperatures: 50°–80°C.
Short Description: 
RXSOL Altreat 400 also impairs crystal growth, modifying the crystal structure to create a soft sludge byproduct that does not adhere to heat transfer surfaces.

read more

RXSOL Altreat 400

$
0
0

Cost-effective recovery of fresh water from seawater is critical to a wide range of industries such as the power, chemical, marine, oil and gas industries. During the distillation process, the formation of scale on heat transfer surfaces can significantly reduce heat transfer efficiency and increase operation and maintenance costs. Scale formation depends on temperature, concentration and pH, but generally takes the form of:

Alias: 

Altreat 400

Application: 

RXSOL Altreat 400 scale inhibitor is a polycarboxylic acid that controls inorganic scale formation. Small amounts of this copolymer, based on maleic acid, effectively handles large quantities of dissolved salts, thus preventing precipitation,settling and baking onto heat transfer surfaces. RXSOL Altreat 400 also impairs crystal growth, modifying the crystal structure to create a soft sludge byproduct that does not adhere to heat transfer surfaces.RXSOL Altreat 400 readily dissolves in any type of water. The typical dosage to feedwater ranges from a minimum of two parts per million (ppm) to a maximum of 10 ppm, depending on the quality of the seawater. This versatile antiscalant effectively performs at the range of temperatures encountered during mechanical vapour compression and during single and multi-effect distillation processes.Test results demonstrate that RXSOL Altreat 400 is more effective than other scale inhibitors under variable conditions,including water type, temperature and run time.

Packing Size: 
210.00 Ltr.
Image: 
Thumb: 
Using Procedure: 

Instructions for use

  • Normal dosing rate 2–10 ppm (max. 10 ppm), depending
  • on the properties of the water to be treated. Ensure adequate mixing at chemical tank before dosing into the system.
  • Recommended operating temperatures: 50°–80°C.
Short Description: 
During the distillation process, the formation of scale on heat transfer surfaces can significantly reduce heat transfer efficiency and increase operation and maintenance costs. RXSOL Altreat 400 also impairs crystal growth, modifying the crystal structure to create a soft sludge byproduct that does

read more

ETHYLENE GLYCOL

$
0
0

ETHYLENE GLYCOL  supplier and exporter. Its INDUSTRIAL GRADE Recommended to use as industrial chemicals; antifreezing agent, monomer solvent. 

Alias: 

1,2-Ethanediol

Application: 
PRODUCT NAME  : ETHYLENE GLYCOL
CAS number  : 107-21-1
UN number     : 
Formula   : CH2OHCH2OH
Odour    : ODOURLESS
Solubility in water    : COMPLETE
Density    : 1.115 at 20 oC
Boiling point       : 197      oC
Melting point    : -13  oC
Viscosity    : 
Flashpoint   : 116  oC
Explosive limits   : 3.2 – 28 Vol%
Vapour pressure   : .07 mbar at 20 oC
Skin absorption/irritation  : YES
TLV       Country  NL                Year  1995  : 10 ppm                 26        mg/m3
Pollution category    1994 : D
Packing Size: 
210.00 Kg.(Liq)
Image: 
Thumb: 
Using Procedure: 

Clear, Colourless, Syrupy liquid which lowers the freezing point of water. odorless and soluble in water, alcohol and acetone. Hazard: Toxic by ingestion and inhalation. Used as a coolant antifreeze, asphalt emulsion paint, heat transfer agent, brake fluid, solvent, or foam stabilizer.

Short Description: 
ETHYLENE GLYCOL - INDUSTRIAL GRADE - Recommended use: industrial chemicals; antifreezing agent

Shri Creation

$
0
0

Shri Creation

Billing Address

FORE and AFT

$
0
0

Fore and Aft cleaning chemicals used as a multipurpose cleaner for the various sector which includes food storage areas; Suitable for cleaning of sanitary fixtures i.e. showers, toilets etc; Can be used on windows and portholes. RXSOL premium quality of fore and aft chemically formulated to remove dirt, oil, grease, grime from ferrous and non-ferrous metal surfaces, porcelain, glass, painted surfaces, stone, cement, wood etc.

Alias: 

WATER BASED ECO CHEMICALS

Active Matter: 
45-48%
Application: 

Suitable for multiple cleaning actions to clean floors, tiles, walls, kitchen platform, utensils, paintwork etc. Also, the diluted solution helps to clean furnitures, plastics, vinyls etc.
Don't forget to Rinse off with water after the cleaning.

Packing Size: 
25.00 Ltr.
Image: 
Thumb: 
Using Procedure: 

Mix concentrate materials 150 to  1250 ml with 100 Ltr of fresh water for general cleaning. 
Use mops, spray or sponge and rinsed off with water after the cleaning.

Note: 

For cleaning of hard surfaces, such as decks, tanks, engine-rooms, etc. These two steps are followed:
High Molecular mixture of CATIONIC and ANIONIC surfactant, to react with all oil and grease molecule
 

Step1:Spray directly on area to be cleaned
Step2:With high-pressure clean entire emulsified area

Due to high emulsification & penetration objects achieves optimal cleaning results.
Due to repulsion activity fore aft-Rx preventing dirt from reforming on the surface.

NOTE: Dry surface vastly absorbs the chemical then wet surface so that apply detergent on the dry surface where possible. 

Short Description: 
Multipurpose cleaner for the various sector which includes food storage areas; Suitable for cleaning of sanitary fixtures i.e. showers, toilets etc; Can be used on windows and portholes.

Resuscitate Acid Cleaner

$
0
0

Acidic Strong detergent formula specialized for use and suitable for the food industry and cleaning of tile and grout which does not respond to other cleaning agents. It cleans away hard water spots and deposits, grout haze, soap scum, and efflorescence. 

Alias: 

P3 – HOROLITH V,

Application: 

Cleaning of equipment such as pasteurizers, sterilizers and evaporators by removal of salts, lime and rust spots. Also it renews the appearance of ceramic tile, porcelain tile, grout, granite, slate, and sandstone. It is also biodegradable and emits fewer vapors than typical acid cleaners. 

Packing Size: 
25.00 Ltr.
Image: 
Thumb: 
Note: 

Resuscitate is used when all other cleaners have failed, and is a safer alternative than aggressive acids like phosphoric and muriatic. The proprietary organic acid is twice as effective in dissolving calcium carbonate than phosphoric acid, yet is classified as only a mild skin irritant. Spinergy Resuscitate will readily remove the embedded soil layer thereby renewing the surface of the grout.

Short Description: 
Strong Acid detergent Cleaner
Information: 

Strong Acid cleaning detergent for pasteurizers, sterilizers and evaporators quickly Removes salts, lime and dissolves rust spots. 

Oxygen Scavanger

$
0
0

Alias: 

Maxtreat 3222, OXYGEN CONTROLER, OXYNON H-171

Active Matter: 
100%
Packing Size: 
25.00 Kg.(PWD)
Image: 
Thumb: 
Using Procedure: 

Always mix 5006 with fresh DI water or softened water . On complete dissolution of the product 5006  may be mixed with most boiler chemicals used for boiler treatment.  Its dosing pumps, piping and valves should be made of stainless steel, polyethylene, or PVC.

Control of  Dose:- RXSOL 5006 dose  is normally controlled by a RXSOL SULFITE test on the boiler water.

Note: 

PACKAGING : also available in a wide range of  containers
COMMON NAME : OXYGEN CONTROLER

Storage And Handling: Store in a cool and tight container. For detailed information, consult the material safety data sheet (MSDS).

Packaging: RXSOL 5006  is available in a wide range of  containers

Short Description: 
This is most common oxygen scavengers used to effectively remove dissolved OXYGEN from your feedwater.

read more

Aqua Break RX 25 Ltrs

$
0
0

It is a new technology surfactant degreaser ( high solvency and emulsification effect ) , Being free from caustic and hydrocarbons it is very gentle on hands & ideal for cleaning walls, wood works, metal and other areas for removal of grease, oil, sludge, carbon deposits, general dirt and grime.

Alias: 

AquaSol , Drew Fresh 2000, 651 575613, Aquabreak PX Unitor Chemical Service Part No. 651 575613,

Active Matter: 
45-48
Application: 

RXSOL-16-3003-025  Mixture of Emulsifier, new technology surfactants ( With high solvency and emulsification effect ) , Corrosion  inhibitors, Rust  preventive. due to free from  caustic  and Hydrocarbon very  gentle on hands & ideal for cleaning Walls Wood works, Metals and all areas . Acts as superior quality cleaner / degreaser .                          

Fields:-
RXSOL-16-3003-025 containing  corrosion  inhibitors to  prevents the  corrosion of metals such as Aluminium, Copper, Brass and Tin. RXSOL-16-3003-025 is designed to clean Animal / Vegetables oils, Fats, Hydrocarbon removes Dirt, Iink, Carbonized grease, Oil, Heavy oils etc. Specialized for all types of cleaning and degreasing.may be applied by brush, handspray or used in ultrasonic cleaning tanks, immersion soak tanks and high and low pressure spray appliances. May be used neat or diluted by up to 50 parts of water according to the amount and type of soil to be removed.

Tank Cleaning:-
(Cargo tank cleaning after mineral, animal, vegetable and fish oil. )

Packing Size: 
25.00 Ltr.
Image: 
Thumb: 
Using Procedure: 

Method of Application and Doses:- 
1st of all by stripping suction removes all possible oil (greasy materials). To prevents evaporation of lighter fraction oil flush the system with cold water.May be brushed on, sprayed (Hand spray/Direct injection) recirculate  the system with RXSOL-16-3003-025 Solution

1.

Cleaning with   washing machines. Dose rate: 0.3-5 ltr per ton wash water (0.03-0.5%).     

2.

Cleaning with recirculation method. Dose rate: 0.5-10 ltr per ton wash water, (0.05-1%).      

3.

Spot cleaning. Hand sprayed neat or diluted up to 1-10  parts water and left for about 15-20 minutes before.washing.off.    

DOSAGE:-

Nature Of Residue

Hand Spray

Direct Injection

Circulation

Veg.Oil (Drying/Non Drying Fish Oil,Alcohol,Acids,Amines)

1-10%

0.03-0.5%

0.05-0.7 %

ORGANIC MATERIAL (HYDROCARBON)

NA

0.0 5-0.5%

0.05-0.7%

 

RXSOL-16-3003-025 has numerous general cleaning applications including the removal of greases, oil, sludge, carbon deposits, general dirt and grime. Can be used as engine room cleaner. Suitable for cargo tank cleaning. Can be used as accommodation cleaner for bulkheads, decks, toilets. Suitable for cleaning of soiled textiles as rugs, covers, mats, overalls, etc. Effectively cleans glass fibre boats, hulls and painted surfaces

Note: 

Aquabreak plays very important role in degreasing as well as cleaning action. Its unique formulation with polymer makes difference from other supplier.  Alkyl glucoside is major component of Aquabreak. 

Safety Accessories: 
Short Description: 
New technology surfactant degreaser for removal of grease, oil, sludge, carbon deposits, general dirt and grime. designed to clean Animal / Vegetables oils, Fats, Hydrocarbon removes Dirt, Iink, Carbonized grease, Oil, Heavy oils etc.
Information: 

Multipurpose universal cleaner and degreaser with a pleasant fresh fragrance. Aquabreak has a good cleaning efficiency on contamination and surface effectiveness even after dilution. Resulting shine and cleaned surface. Aquabreak formulated without caustic and hydrocarbon solvents. Its biodegradable properties resulting easy disposal with minimum hazardous to environment.

Keywords: 

Also refer this link :::
 

Aqua Break RX 20 Ltr - Concentrated cleaning agent based on nonionic detergents, alkaline components, special components to stabilise the hardness and corrosion inhibitors for aluminium.RXSOL-16-3003-020

Aqua Break RX 25 Ltrs - New technology surfactant degreaser for removal of grease, oil, sludge, carbon deposits, general dirt and grime. designed to clean Animal / Vegetables oils, Fats, Hydrocarbon removes Dirt, Iink, Carbonized grease, Oil, Heavy oils etc.RXSOL-16-3003-025

Aqua Break RX 210 Ltrs  -  Specialized for all types of cleaning and degreasing. Effective to clean Animal / Vegetable oils, Fats, Hydrocarbon removes Dirt, Iink, Carbonized grease, Oil, Heavy oils etc. Effectively Clean Fibre Glass, Boats, Hulls and Painted Surfaces.RXSOL-16-3003-210

Aqua Break RX HD 20 Ltr - Numerous general cleaning applications including the remover of grease, oil, sludge, carbon deposits, general dirt and grimeRXSOL-20-3017-020

Aqua Break RX HD 25 Ltr  - Advanced degreaser for engine rooms and cargo tanks it can be used for all types of cleaning and degreasing including engine rooms and cargo tanks. Can be used as an accommodation cleaner for bulkheads, deck, toilet etc. Suitable for cleaning of soiled textiles such as rugs, cover, mats etc. EffectivelyRXSOL-20-3017-025

Aqua Break RX HD 210 Ltr - Cargo tank cleaning after mineral, animal, vegetable and fish oil, Effective grease cleaner and free from caustic and hydrocarbonsRXSOL-20-3017-210

read more

Aqua Break RX 20 Ltr

$
0
0

Acts as superior quality cleaner/degreaser. It is a new technology surfactant degreaser ( high solvency and emulsification effect ) , Being free from caustic and hydrocarbons it is very gentle on hands & ideal for cleaning walls, wood works, metal and other areas for removal of grease, oil, sludge, carbon deposits, general dirt and grime.
 

Alias: 

Aqua Sol

Active Matter: 
63-72
Application: 

Can be used for all types of cleaning and degreasing including engine rooms and cargo tanks. Can be used as accoomodation cleaner for Bulkheads, Deck, Toilet etc. Suitable for cleaning of Soiled Textiles such as rugs, cover, mats etc. Effectively Clean Fibre Glass, Boats, Hulls and Painted Surfaces.

NOTE : Bio-degradable product, it is low toxic, non-caustic and from hydrocarbons.                       

Fields:-
RXSOL-16-3003-020 containing  corrosion  inhibitors to  prevents the  corrosion of metals such as Aluminium, Copper, Brass and Tin. RXSOL-16-3003-020 is designed to clean Animal / Vegetables oils, Fats, Hydrocarbon removes Dirt, Iink, Carbonized grease, Oil, Heavy oils etc. Specialized for all types of cleaning and degreasing.may be applied by brush, handspray or used in ultrasonic cleaning tanks, immersion soak tanks and high and low pressure spray appliances. May be used neat or diluted by up to 50 parts of water according to the amount and type of soil to be removed.

Tank Cleaning:-
(Cargo tank cleaning after mineral, animal, vegetable and fish oil. )                                               

Packing Size: 
20.00 Ltr.
Image: 
Thumb: 
Using Procedure: 

1st of all by stripping suction removes all possible oil (greasy materials). To prevents evaporation of lighter fraction oil flush the system with cold water.May be brushed on, sprayed (Hand spray/Direct injection) recirculate  the system with RXSOL-16-3003-020 Solution

1.

Cleaning with   washing machines. Dose rate: 0.3-5 ltr per ton wash water (0.03-0.5%).     

2.

Cleaning with recirculation method. Dose rate: 0.5-10 ltr per ton wash water, (0.05-1%).      

3.

Spot cleaning. Hand sprayed neat or diluted up to 1-10  parts water and left for about 15-20 minutes before.washing.off.    

DOSAGE:-

Nature Of Residue

Hand Spray

Direct Injection

Circulation

Veg.Oil (Drying/Non Drying Fish Oil,Alcohol,Acids,Amines)

1-10%

0.03-0.5%

0.05-0.7 %

ORGANIC MATERIAL (HYDROCARBON)

NA

0.0 5-0.5%

0.05-0.7%

RXSOL-16-3003-020 has numerous general cleaning applications including the removal of greases, oil, sludge, carbon deposits, general dirt and grime. Can be used as engine room cleaner. Suitable for cargo tank cleaning. Can be used as accommodation cleaner for bulkheads, decks, toilets. Suitable for cleaning of soiled textiles as rugs, covers, mats, overalls, etc. Effectively cleans glass fibre boats, hulls and painted surfaces

Note: 

WHY RXSOL-16-3003-020 is better ?

An economical  highly concentrated product.

Compatible with oily water separators.

Releasing the oil phase for reclamation.

Suitable for all types of floors. Deodorizing nature.

Eliminates the need to buy & stock duplicate products because of its effectiveness.

Also used for gas and hydrocarbon freeing of tanks. Free from caustic & hydrcarbon, Non flammable Water based, Biodegradable. Safe to metal

 

Short Description: 
Concentrated cleaning agent based on nonionic detergents, alkaline components, special components to stabilise the hardness and corrosion inhibitors for aluminium.
Information: 

 Aqubreak is classified as one of versatile cleaner which is free from caustic and solvent. Good Blend of surfactant makes easy OIL EMULSIFYING properties. Easily availabe at all Indian and Middle East port. 

Keywords: 

Degreasing Agent, Non Caustic Cleaner, aquabreak px msds, marine universal cleaner

aquatuff

enviroclean

Tag Identification: 

PX, Aquabreak, Cleaning Agent, Water Based Degreaser

Useful Area: 

Ship galleys decks cleaning agent. Best Oil cleaning action in Engine room, Helpfull for cargo tank cleaning. Also can be utilized as multipurpose cleaning agent for soiled textiles as rugs, covers, mats, overalls etc. Also effectively cleans boats, machinery parts, fibreglass area.

Supply Location: 

Aquabreak available in various packing  size for making smooth supply in Mumbai, JNPT, GOA, Manglore, Kandla - Gandhidham, Chennai - Ennore, Vizag _ Viakhapatnam, Gangavaram, Kakinada, Kolkata, Haldia, Middle East, Dubai, Fujairah, Sharjah

Industrial Area: 

Best classified cleaner for Shiping Industries, Oil and Rigs, Railway, Petroleum Industries. Multi-purpose utility of Aqua Break Eliminates the need to buy & stock duplicate products because of its effectiveness.

Also refer this link :::
 

Aqua Break RX 20 Ltr - Concentrated cleaning agent based on nonionic detergents, alkaline components, special components to stabilise the hardness and corrosion inhibitors for aluminium.RXSOL-16-3003-020

Aqua Break RX 25 Ltrs - New technology surfactant degreaser for removal of grease, oil, sludge, carbon deposits, general dirt and grime. designed to clean Animal / Vegetables oils, Fats, Hydrocarbon removes Dirt, Iink, Carbonized grease, Oil, Heavy oils etc.RXSOL-16-3003-025

Aqua Break RX 210 Ltrs  -  Specialized for all types of cleaning and degreasing. Effective to clean Animal / Vegetable oils, Fats, Hydrocarbon removes Dirt, Iink, Carbonized grease, Oil, Heavy oils etc. Effectively Clean Fibre Glass, Boats, Hulls and Painted Surfaces.RXSOL-16-3003-210

Aqua Break RX HD 20 Ltr - Numerous general cleaning applications including the remover of grease, oil, sludge, carbon deposits, general dirt and grimeRXSOL-20-3017-020

Aqua Break RX HD 25 Ltr  - Advanced degreaser for engine rooms and cargo tanks it can be used for all types of cleaning and degreasing including engine rooms and cargo tanks. Can be used as an accommodation cleaner for bulkheads, deck, toilet etc. Suitable for cleaning of soiled textiles such as rugs, cover, mats etc. EffectivelyRXSOL-20-3017-025

Aqua Break RX HD 210 Ltr - Cargo tank cleaning after mineral, animal, vegetable and fish oil, Effective grease cleaner and free from caustic and hydrocarbonsRXSOL-20-3017-210

Generic Name: 

Degreaser cum oil water separator

read more

Viewing all 2359 articles
Browse latest View live


Latest Images