Bio-Dispersant effectively cleans and disperse heavily fouled Cooling Water Systems. Fouling by microbiological slimes is reducing overall system efficiency. RXSOL bio dispersant is the powerful and concentrated product to remove and disperse the unwanted deposits, Which is resulting in water clarity.
Accepta 231, Ferrofos 8462
RXSOL-40-4093-210 is a high-performance cooling water bio-dispersant that incorporates powerful surface active agents. It is scientifically formulated for the treatment of cooling systems including recirculating and once-through cooling water systems.
RXSOL-40-4093-210 should be fed continuously or slug dosed into the system at a point where it will be mixed and uniformly distributed.
RXSOL-40-4093-210 is essentially non-corrosive and dosing equipment may be of mild steel, stainless steel, teflon, polyethylene, acrylic resin or polypropylene.
Dosage levels for RXSOL-40-4093-210 will be in the range of 1100ppm depending on the fouling tendency. Higher dosages may be required if the system is heavily fouled.
For further technical assistance concerning RXSOL-40-4093-210 please contact Rx Marine.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for RXSOL-40-4093-210 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link:
Product Benefits
- Powerful bio-dispersant
- Suitable for use in both re-circulating and once-through cooling water systems
- Improves the performance of cooling water systems
- Improves system efficiency
- Removes and disperses unwanted deposits
- Controls oil based fouling
Bio Dispersant is also suitable for cooling water system where makeup water is treated water from STP.
Cooling water fouling clarifier