Potable Water Stabiliser Liquid is a combination of polyphosphates, having stabilising properties. The product effectively and economically provides scale and corrosion control in potable water and other shipboard once-through water systems. This product is specially designed to reduce the corrossion that is created in the storage systems of pot water. The product creates a protective film within the tank on the metal surfaces, which does not affect the colour, taste or smell of water. Besides phosphates.
RXSOL - 624916 POTABLE WATER STABILIZER, chemo PWS, Caretreat PWT, Fresh Water Treatment
Storage temperature should not exceed 40 degrees c.
Features
• Prevents “Red Water” in ships potable water systems
• Controls corrosion and scaling in pipelines and other equipment handling softened or evaporated water
• Supplied in convenient to use liquid form.
• Increases system life and reduces maintenance costs.
RXSOL-51-6002-025 is used in potable water systems and other shipboard once-through water systems.
Dosing and Control
Potable Water Stabiliser Liquid is non corrosive to ordinary metals used in feeding equipment and may be fed with a simple by-pass feeder or suitable chemical dosing pump. Typical dosage rate is 15 to 25mls/m3 water. or The initial recommended dosage is 750 to 1.5 liter per 20 tonnes of water. This provides a level of 12 ppm of phosphate salts.
The product can be injected into the discharge lines of the fresh water generator or directly into the fresh water pumps’ suction manifold.